服务热线

18500300266
网站导航
Hydromechanics
当前位置: 首页 > Products > Hydromechanics

H13 Vortex Apparatus

产品时间:2022-03-04 11:35:29

简要描述:

Studies the phenomena of free andfixed vortices• For studies of both free and forced vortices • Transparent vessel - users can see the vortices from all angles • Includes a traverse probe to measure w

详细介绍

Studies the phenomena of free and fixed vortices

• For studies of both free and forced vortices 

• Transparent vessel - users can see the vortices from all angles 

• Includes a traverse probe to measure water surface profile 

• Low-voltage variable speed motor for safety 

• Ideal for classroom demonstrations as well as laboratory experiments 

• Compact and easily installed in the laboratory 

• Works with either of TecQuipment’s Hydraulic Benches (H1 or H1D)

Description 

The TecQuipment Vortex Apparatus enables students to produce both free and forced vortices, and measure the vortex water surface profile. 

The equipment consists of a transparent vessel on a support frame, which mounts on a TecQuipment hydraulic bench (Gravimetric or Volumetric Hydraulic Benches, H1 or H1D - available separately). It may also work with another suitable clean water supply and drain. 

A low-voltage, variable-speed motor rotates the vessel about its vertical axis. A speed-control unit (included), sited away from the main apparatus, controls the speed of rotation. 

To produce a forced vortex, students add water to the rotating vessel until it is about half full. A forced vortex forms. After a few minutes the vortex becomes constant, and students can measure the surface profile using the traverse probe. The traverse probe can move both horizontally and vertically, and both axes have linear scales. Students can also measure distribution of total head by replacing the traverse probe with a Pitot tube. 

To produce a free vortex, students place a smaller, perforated transparent cylinder inside the main vessel. This forms an annulus into which a continuous water supply is directed. When the vessel rotates, water passes through the perforations and spirals slowly inwards to a small hole in the centre of the base of the vessel. The surface falls rapidly towards the centre and produces an air core. 

Students measure the surface profile using the traverse probe.

Experiments 

• Determination of the surface profile of a forced vortex 

• Determination of the surface profile of a free vortex 

• Determination of the total head variation in a forced vortex 

• Comparison of results with theoretical predictions 

Essential Base Unit 

• Gravimetric Hydraulic Bench (H1) 

or 

• Volumetric Hydraulic Bench (H1D) 

or 

• Suitable water supply and drain

 


产品咨询

留言框

  • 产品名称:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

推荐产品

Copyright © 2012-2020 北京青铄鑫业科技有限公司 版权所有  京ICP备 13039369号

地址:北京市昌平区黄平路19号院4号10层 电话:18500300266 邮箱:sale@tsingso.com

关注我们