● Assembly, disassembly and testing the different parts of an agitated reactor
Performing maintenance at different levels
Understanding and reading of PID or 3D diagrams
Selection of suitable material
Change a simple bridle
Replacing of a stirring mobile
Assembly of motor
Installation of a connection or utility
Detection of anomalies of the assembly and react accordingly
Listen to and follow the instructions
Check and control Assembly
Evaluation of skills associated with the operation
Tests in real conditions
Look after the order and cleanliness of the workplace
General specifications
Reactor:
● 10 L capacity.
● SS cover with: hole of loading, agitation, temperature, output from the condenser. PTFE gasket. Mobile thermal protection.
● Draining valve.
Stirring:
● Motor with low fixed speed.
● Motor /mobile SS shafts coupling (propeller or bi‐blade).
Thermoregulatory group:
● Integrated controller.
● Power.
● Set of flanges and gaskets.
Cooling circuit:
● Pressure control.
● SS condenser and glass sight.
● Adjusting valve.
● Isolation valve.
● Connection with the capacitor.
Vacuum circuit
● Diaphragm vacuum pump.
● Vacuum gauge.
● Isolation valve.
● Adjusting valve.
● Events valve.
● Safety valve.
Instrumentation
● 2 temperature probes.
● Flowmeter.
● Manometer.
This unit allows you to assemble and disassemble the different elements that constitute a reactor, to familiarize the user with the maintenance of this type of equipment.
The user can mount the unit as a whole or a part. Manipulations can be carried out with water but the unit allows to the study off all operations related to this type of reactor.